LeakAlertor toilet leak detector
GREEN: No leak, no problem. RED: A leak has been detected. YELLOW: The battery is low. The unit will also chirp.
The LeakAlertor™ electronically monitors your toilet and notifies you visually and audibly when the flapper is leaking.
- Low cost
- Saves money
- Installs in seconds - No tools required
- Fully Automatic - No set up necessary
- Works on any toilet
- Visual and audible alerts
- Small, sleek design
Proudly and 100% made in the U.S.A. Imagined Here. Created Here. Made Here
The LeakAlertor works by isolating the vibration signature of a fill valve action and qualifying it as either a normal flush cycle or a refill action in response to a leaking flapper.
How it works: On the face of the product are three LEDs. -The LeakAlertorTM flashes GREEN when no leak is detected. -It will flash RED and beep* if a leak has been detected. - When the LeakAlertor flashes YELLOW it means that the battery is low and needs to be replaced. The typical life of the LeakAlertor is 15 to 18 months. *When the LeakAlertor detects a leak it will flash red, if the leak has gone uncorrected after 3 days, the unit will beep to alert the user
Make sure the toilet lid is down to prevent accidentally dropping the unit into the bowl
1 Peel off the protective backing.
2 Press the unit onto the outside surface of the tank.
3 After attaching the unit to the tank, Remove the Battery Activation tab. The green lamp will flash
4 When the red lamp flashes and the LeakAletor bleeps, Flush the toilet.
That's it your done!